language

Get free product quotes

Fill in your phone and email information, and we will contact you promptly within one business day to resolve the issue you raised as soon as possible.

Home

Purpose and Features

M, AH, and HH type pumps are cantilever, horizontal centrifugal slurry pumps. They are suitable for conveying strongly abrasive, high-concentration slurry in industrial sectors such as metallurgy, mining, coal, power, and building materials. These pumps can also be used in multiple stages in series.

The pump bodies of M, AH, and HH type pumps feature replaceable wear-resistant metal or rubber linings, while the impellers are made of wear-resistant metal or rubber materials. The pump bodies and impellers of HH type pumps only use wear-resistant metal.

The shaft seals of M, AH, and HH type pumps can be either packed seals or centrifugal seals. The pump's discharge port can be installed and used at eight different angles, spaced at 45° intervals, according to needs.

Selection introduction

Based on the performance curve of the pump, the selected flow range should be:

M and AH type pumps

For high-concentration and highly erosive slurry, the flow range is 40-80%; for medium-concentration and moderately erosive slurry, the flow range is 40-100%; for low-concentration and low-erosive slurry, the flow range is 40-120%

HH-type pumps

For medium concentration and medium abrasiveness slurry, the flow range is 40-80%; for low concentration and low abrasiveness slurry, the flow range is 40-100% (the flow rate corresponding to the highest efficiency point at a certain speed is 100%)

Model significance

For example: 10/8ST-AH(M, HH)

10 - Diameter of the pump suction inlet
8 - Pump discharge diameter
HH一一 High-head slurry pump
M, AH - Slurry Pump
ST-11 bracket type

Structural diagram

1. Bearing assembly
2. Packing box
3. Pump body
4. Sheath
5. Pump cover
6. Impeller
7. Front fender
8. Rear fender
9. Bracket

Structural diagram

1. Packing sealing component
2. Metal filter components
3. Secondary impeller sealing component
4. Rubber filter component
5. Bearing components
6. Pump body
7. Packing gland
8. Packing material
9. Front water seal ring
10 shaft sleeves
11. Packing box
12. Rear guard plate
13. Impeller
14. Sheath
15. Front protective panel
16. Pump cover
17. Bracket
18. Packing gland
19. Packing material
20. Water seal ring
21. Packing pad
22. Shaft sleeve
23. Pressure relief cover
24. Auxiliary impeller
25. Rear protective sheath
26. Impeller
27. Front protective sheath
28. Front guard plate

M. AH and HH slurry pump type spectrum

Transmission method


CV	DC	ZV	CR

Performance Parameter Table

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kw)	Matching Power (kw)	Motor Specif	Weight (kg)	Overall dimensions L×W×H (mm)	Dia. of pump (mm) Inlet	Dia. of pump (mm) Outlet
1.5/1B-AH(R)	3.6	7	1200	3.2	20	0.34	2	Y100L₁-4	91	583×362×368	38	25
	7.5	6			30	0.41
	11.52	5			30	0.52	1.5
1.5/1B-AH(R)	4.32	9.4	1400	3.2	20	0.55	1.5	Y100L₁-4	91	583×362×368	38	25
	8.28	8.5			30	0.64
	12.24	7			30	0.78	2.2
1.5/1B-AH(R)	4.68	12	1600	3.2	20	0.77	1.5	Y90S-2	91	583×362×368	38	25
	8.64	11.5			30	0.90	2.2	Y90L-2
	12.6	10			30	1.2	3	Y100L-2
1.5/1B-AH(R)	5.04	15.4	1800	3.2	20	1.06	2.2	Y90L-2	91	583×362×368	38	25
	9.36	14.6			30	1.24		Y100L-2
	13.68	13			30	1.61	3	Y112M-2
1.5/1B-AH(R)	5.4	19	2000	3.2	20	1.4	3	Y100L-2	91	583×362×368	38	25
	10.08	18			30	1.65
	14.4	16.5			30	2.16	4	Y112M-2
1.5/1B-AH(R)	5.76	21	2100	3.2	20	1.65	2.2	Y90L-2	91	583×362×368	38	25
	10.08	20			30	1.83		Y100L-2
	14.76	18			30	2.41	3	Y112M-2
1.5/1B-AH(R)	5.76	23	2200	3.2	20	1.8	3	Y100L-2	91	583×362×368	38	25
	10.44	22			30	2.08
	15.12	20			35	2.36	4	Y112M-2
1.5/1B-AH(R)	5.76	25	2300	3.2	20	1.96	3	Y100L-2	91	583×362×368	38	25
	10.8	24			30	2.35
	15.48	22			35	2.95	4	Y112M-2
1.5/1B-AH(R)	6.12	27.3	2400	3.2	20	2.28	4	Y112M-2	91	583×362×368	38	25
	11.16	26			30	2.63
	15.84	24			35	2.96	5.5	Y132S-2
1.5/1B-AH(R)	6.12	29.7	2500	3.2	20	2.48	4	Y112M-2	91	583×362×368	38	25
	11.52	28.3			30	2.96
	16.56	26			35	3.55	5.5	Y132S-2
1.5/1B-AH(R)	6.48	32	2600	3.2	20	2.82	3	Y112M-2	91	583×362×368	38	25
	11.52	30.8			30	3.22
	16.56	28.5			35	3.67	5.5	Y132S-2
1.5/1B-AH(R)	6.12	29.7	2500	20	2.48	94	0.85	Y112M-2	F	583×362×368	38	25
	11.52	28.3		30	2.96			Y132S₁-2
	16.56	26		35	3.35
1.5/1B-AH(R)	6.48	32	2600	20	2.82	94	0.85	Y112M-2	F	583×362×368	38	25
	11.52	30.8		30	3.22			Y132S₁-2
	16.56	28.5		35	3.67		5.5
1.5/1B-AH(R)	6.48	34.8	2700	20	3.07	94	0.85	Y132S₁-2	F	583×362×368	38	25
	11.88	33.2		30	3.58
	17.28	30.6		35	4.11		7.5	Y132S₂-2
1.5/1B-AH(R)	6.48	37.1	2800	20	3.27	94	0.85	Y132S₁-2	F	583×362×368	38	25
	11.88	35.8		30	3.86
	17.28	33.4		35	4.49		7.5	Y132S₂-2
1.5/1B-AH(R)	6.48	40.5	2920	20	3.57	94	0.85	Y132S₁-2	F	583×362×368	38	25
	12.24	39.2		30	4.36
	18	36.5		35	5.11		5.5	Y132S₂-2
1.5/1B-AH(R)	6.48	43	3000	20	3.79	94	0.85	Y132S₁-2	F	583×362×368	38	25
	12.24	41.5		30	4.61
	18	38.5		35	5.39		7.5	Y132S₂-2
1.5/1B-AH(R)	6.48	46	3100	20	4.06	94	0.85	Y132S₂-2	F	583×362×368	38	25
	12.6	44.5		30	5.09
	18.72	41.6		35	6.06		7.5	Y160M₁-2
1.5/1B-AH(R)	6.48	49	3200	20	4.32	94	0.85	Y132S₂-2	F	583×362×368	38	25
	12.6	47.5		30	5.43
	18.72	44		35	6.41		7.5	Y160M₁-2
1.5/1B-AH	6.84	55.5	3400	20	5.17	94	0.85	Y132S₂-2	F	583×362×368	38	25
	14.76	53		35	6.09			Y160M₁-2
	19.44	50.2		40	6.64		15	Y160M₂-2
1.5/1B-AH	6.84	62	3600	20	5.77	94	0.85	Y160M₁-2	F	583×362×368	38	25
	14.76	59.6		35	6.84		11
	20.88	56.3		40	8		15	Y160M₂-2
1.5/1B-AH	6.48	69	3800	20	6.43	94	0.85	Y160M₁-2	F	583×362×368	38	25
	15.12	66.7		35	7.85		11
	21.6	63		40	9.26		15	Y160M₂-2

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
1.5/1C-HH	5.04	37.4	1400	10	52	5.2	7.5	Y132M-4	318	759×540×508	38	25
	10.08	37		18	58	5.7	7.5	Y160M-4
	15.12	36.2		25	61	6	15	Y160L-4
1.5/1C-HH	5.26	40.7	1460	10	5.9	6.4	7.5	Y132M-4	318	759×540×508	38	25
	10.44	40.3		28	6.4	6.9	11	Y160M-4
	15.48	39.5		24	6.7	7.1	15	Y160L-4
1.5/1C-HH	5.4	43	1500	10	6.4	6.4	11	Y160M-4	318	759×540×508	38	25
	10.44	42.5		18	6.7	6.7	15	Y160L-4
	15.48	42		24	7.4	7.4	18.5	Y180M-4
1.5/1C-HH	5.4	46	1550	10	6.8	6.8	11	Y160M-4	318	759×540×508	38	25
	10.44	45.3		17	7.6	7.6	15	Y160L-4
	15.48	44.5		24	7.8	7.8	18.5	Y180M-4
1.5/1C-HH	5.58	49	1600	10	7.5	7.5	15	Y160M-4	318	759×540×508	38	25
	10.8	48.3		17	8.4	8.4	15	Y160L-4
	15.84	47.5		23	8.9	8.9	18.5	Y180M-4
1.5/1C-HH	5.76	52.4	1650	10	8.3	8.3	15	Y160L-4	318	759×540×508	38	25
	10.8	51.9		17	9	9	18.5	Y180M-4
	16.02	51		23	9.7	9.7	22	Y180L-4
1.5/1C-HH	5.94	55	1700	10	8.9	8.9	15	Y160L-4	318	759×540×508	38	25
	11.16	54.5		16	10.4	10.4	18.5	Y180M-4
	16.2	63.8		22.5	10.6	10.6	22	Y180L-4
1.5/1C-HH	6.12	58.1	1750	10	9.7	9.7	15	Y160L-4	318	759×540×508	38	25
	11.16	57.6		16	11	11	18.5	Y180M-4
	16.2	57		22	11.5	11.5	22	Y180L-4
1.5/1C-HH	6.3	61.5	1800	10	10.6	10.6	18.5	Y160L-2	318	759×540×508	38	25
	11.34	61		16	11.8	11.8	22	Y180L-4
	16.38	60		22	12.2	12.2	30	Y200L₁-2
1.5/1C-HH	6.48	65	1850	10	11.5	11.5	18.5	Y160L-2	318	759×540×508	38	25
	11.52	64.7		16	12.7	12.7	22	Y180L-4
	16.56	64		22	13.2	13.2	30	Y200L₁-2
1.5/1C-HH	6.48	68.8	1900	10	12.8	12.8	22	Y160L-2	318	759×540×508	38	25
	11.88	68.4		16	13.8	13.8	30	Y180L-4
	16.74	67.6		22	14.7	14.7	30	Y200L-4
1.5/1C-HH	6.48	65	1850	10	11.5	11.5	18.5	Y160L-2	318	759×540×508	38	25
	11.52	64.7		16	12.7	12.7	22	Y180L-4
	16.56	64		22	13.2	13.2	30	Y200L-4
1.5/1C-HH	6.48	68.8	1900	10	12.8	12.8	22	Y160L-2	318	759×540×508	38	25
	11.88	68.4		16	13.8	13.8	22	Y180L-4
	16.74	67.6		22	14.7	14.7	30	Y200L-4
1.5/1C-HH	7.02	72.4	1950	10	13.9	13.9	22	Y180M-2	318	759×540×508	38	25
	11.88	72		15	15.5	15.5	22	Y200L₁-2
	16.92	71		21	15.6	15.6	30
1.5/1C-HH	7.2	72.6	2000	10	15	15	22	Y180M-2	318	759×540×508	38	25
	12.24	75.2		16	15.7	15.7	30	Y200L₁-2
	17.1	74		21	16.4	16.4	30
1.5/1C-HH	7.38	80.1	2050	10	16.1	16.1	22	Y180M-2	318	759×540×508	38	25
	12.24	79.5		16	17.7	17.7	22
	17.28	78.8		21	18.6	18.6	30	Y200L₁-2
1.5/1C-HH	7.74	83.8	2100	10	17.7	17.7	30	Y200L₁-2	318	759×540×508	38	25
	12.6	82.9		15	19	19	30
	17.46	82.2		20	19.6	19.6	30
1.5/1C-HH	7.92	87.9	2150	10	-	-	30	Y200L₁-2	318	759×540×508	38	25
	12.96	86		15	-	-	30
	17.64	87		20	-	-	30
1.5/1C-HH	8.1	92	2200	10	20.3	20.3	30	Y200L₁-2	318	759×540×508	38	25
	12.96	91.3		15	21.5	21.5	30
	18	90		20	22.1	22.1	30
2/1.5B-AH(R)	7.2	8.5	1200	3	18	0.93	1.5	Y90L-4	104	592×410×381	51	38
	14.4	8		25	1.25	1.25	2.2	Y100L₁-4
	21.6	7		35	1.18	1.18	2.2
2/1.5B-AH(R)	7.92	12	1420	3	19	1.36	2.2	Y100L₁-4	104	592×410×381	51	38
	15.12	11.2		30	1.54	1.54	3	Y100L₂-4
	22.68	10.3		35	1.82	1.82	3
2/1.5B-AH(R)	9	15.1	1600	3	20	1.85	3	Y100L-4	104	592×410×381	51	38
	18	14.4		33	2.14	2.14	4	Y112M-2
	25.92	13		38	2.41	2.41	4

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
2/1.5B-AH(R)	10.8	19.3	1800	3	23	2.47	4	Y112M-2	104	592×410×381	51	38
	19.8	18.3		35	2.82	2.82	4	Y132S₁-2
	28.8	17		40	3.33	3.33	5.5
2/1.5B-AH(R)	10.8	21.6	1900	3	24	2.65	4	Y112M-2	104	592×410×381	51	38
	21.6	20.5		37	3.26	3.26	5.5	Y132S₁-2
	31.32	18.9		42	3.84	3.84	7.5	Y132S₂-2
2/1.5B-AH(R)	11.52	24	2000	3	25	3.01	4	Y112M-2	104	592×410×381	51	38
	21.6	23		37	3.66	3.66	5.5	Y132S₁-2
	33.12	2.8		43	4.36	4.36	7.5	Y132S₂-2
2/1.5B-AH(R)	12.6	26.5	2100	3	29	3.14	5.5	Y132S₁-2	104	592×410×381	51	38
	23.4	25.2		49	4.02	4.02	7.5	Y132S₂-2
	34.2	22.8		44	4.83	4.83	7.5
2/1.5B-AH(R)	12.96	29	2200	3	29	3.53	5.5	Y132S₂-2	104	592×410×381	51	38
	25.2	27.4		41	4.59	4.59	7.5	Y132S₂-2
	36	25		45	5.45	5.45	11	Y160M₁-2
2/1.5B-AH(R)	13.68	31.7	2300	3	29	4.07	5.5	Y132S₂-2	104	592×410×381	51	38
	25.92	30		3	5.16	5.16	7.5	Y132S₂-2
	37.44	27.2		3.5	6.16	6.16	11	Y160M₁-2
2/1.5B-AH(R)	14.4	34.4	2400	3	30	4.5	7.5	Y132S₂-2	104	592×410×381	51	38
	27	32.6		42	5.71	5.71	11	Y160M₁-2
	38.88	29.6		45	6.96	6.96	11
2/1.5B-AH(R)	15.12	37.6	2500	3	30	5.16	7.5	Y132S₂-2	104	592×410×381	51	38
	28.8	35.5		3	6.48	6.48	11	Y160M₁-2
	41.04	32.2		4	45	-	-	Y160M₂-2
2/1.5B-AH(R)	15.48	40.0	2600	3	30	5.68	7.5	Y132S₂-2	104	592×410×381	51	38
	28.8	38.3		43	6.99	6.99	11	Y160M₁-2
	42.48	34.6		45	8.89	8.89	15	Y160M₂-2
2/1.5B-AH	16.2	44	2700	3	30	6.47	11	Y160M₁-2	104	592×410×381	51	38
	30.6	41.9		3.2	43	8.12	8.12	15	Y160M₂-2
	44.64	37.6		5.2	45	10.16	10.16	15
2/1.5B-AH	16.2	47	2800	3	30	6.91	11	Y160M₁-2	104	592×410×381	51	38
	30.6	45		3.6	42	8.93	8.93	15	Y160M₂-2
	46.08	40.5		6.2	45	11.29	11.29	15

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
2/1.5B-AH	18	54	3000	3	30	8.82	15	Y160M₂-2	104	592×410×381	51	38
	32.4	51		3.5	42	10.71	15
	48.6	46		6.5	45	13.53	15
2/1.5B-AH	21.6	61	3200	-	-	-	15	Y160M₂-2	104	592×410×381	51	38
	37.8	57		-	-	-	15
3/2C-AH(R)	21.6	14.5	1300	3	45	1.9	4	Y112M-4	191	768×476×464	76	51
	32.4	14		3	52	2.38	5.5	Y132S-4
	42.48	13		3	56	2.69	5.5
3/2C-AH(R)	25.2	17.3	1400	3	45	2.64	5.5	Y132S-4	191	768×476×464	76	51
	36	16.7		3	53	3.09	7.5	Y132M-4
	46.08	15.8		3	56	3.54	7.5
3/2C-AH(R)	25.2	19.3	1500	3	45	2.93	4	Y112M-4	191	768×476×464	76	51
	36	18.7		3	52	3.53	5.5	Y132S-4
	48.6	17.5		3	58	4.14	7.5	Y132M-4
3/2C-AH(R)	27	22	1600	3	45	3.60	5.5	Y132S-4	191	768×476×464	76	51
	39.6	21		3	52	4.36	7.5	Y132M-4
	52.2	20		3	56	7.5	7.5
3/2C-AH(R)	28.8	24.8	1700	3	45	4.32	7.5	Y132M-4	191	768×476×464	76	51
	43.2	23.8		3	53	5.28	11	Y160M-4
	55.8	22.2		3.5	56	6.02	11
3/2C-AH(R)	30.24	27.8	1800	3	45	5.09	7.5	Y132M₁-4	191	768×476×464	76	51
	45	26.3		3	53	6.08	11	Y160M₁-2
	58.68	25		4	56	7.13	11
3/2C-AH(R)	32.4	31	1900	3	45	6.08	11	Y160M₁-2	191	768×476×464	76	51
	46.8	30		3	52	7.35	15	Y160M₂-2
	61.2	28		4.2	56	8.33	15
2/1.5B-AH	18	54	3000	3	30	8.82	15	Y160M₂-2	104	592×410×381	51	38
	32.4	51		3.5	42	10.71	15
	48.6	46		6.5	45	13.53	15
2/1.5B-AH	21.6	61	3200	-	-	-	15	Y160M₂-2	104	592×410×381	51	38
	37.8	57		-	-	-	15
3/2C-AH(R)	21.6	14.5	1300	3	45	1.9	4	Y112M-4	191	768×476×464	76	51
	32.4	14		3	52	2.38	5.5	Y132S-4
	42.48	13		3	56	2.69	5.5
3/2C-AH(R)	25.2	17.3	1400	3	45	2.64	5.5	Y132S-4	191	768×476×464	76	51
	36	16.7		3	53	3.09	7.5	Y132M-4
	46.08	15.8		3	56	3.54	7.5
3/2C-AH(R)	25.2	19.3	1500	3	45	2.93	4	Y112M-4	191	768×476×464	76	51
	36	18.7		3	52	3.53	5.5	Y132S-4
	48.6	17.5		3	58	4.14	7.5	Y132M-4
3/2C-AH(R)	27	22	1600	3	45	3.60	5.5	Y132S-4	191	768×476×464	76	51
	39.6	21		3	52	4.36	7.5	Y132M-4
	52.2	20		3	56	7.5	7.5
3/2C-AH(R)	28.8	24.8	1700	3	45	4.32	7.5	Y132M-4	191	768×476×464	76	51
	43.2	23.8		3	53	5.28	11	Y160M-4
	55.8	22.2		3.5	56	6.02	11
3/2C-AH(R)	30.24	27.8	1800	3	45	5.09	7.5	Y132M₁-4	191	768×476×464	76	51
	45	26.3		3	53	6.08	11	Y160M₁-2
	58.68	25		4	56	7.13	11
3/2C-AH(R)	32.4	31	1900	3	45	6.08	11	Y160M₁-2	191	768×476×464	76	51
	46.8	30		3	52	7.35	15	Y160M₂-2
	61.2	28		4.2	56	8.33	15

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
3/2C-AH(R)	33.48	34.2	2000	3	53	6.93	11	Y160M₂-2	191	768×476×464	76	51
	50.4	32.6		3.2	53	8.44	15	Y160M₁-2
	65.52	30.7		4.6	56	9.78	18.5	Y160L-2
3/2C-AH(R)	35.28	38	2100	3	45	8.11	15	Y160M₁-2	191	768×476×464	76	51
	52.2	36.1		3.5	53	9.68	18.5	Y160L-2
	69.12	34		5.2	56	11.43	22	Y180M-2
3/2C-AH	37.08	41.3	2200	3	45	9.27	15	Y160M₁-2	191	768×476×464	76	51
	54	39.7		4	53	11.02	18.5	Y160L-2
	72	37.4		5.5	56	13.1	22	Y180M-2
3/2C-AH	37.8	45.2	2300	3	45	10.34	18.5	Y160L-2	191	768×476×464	76	51
	57.6	43.4		4.5	53	12.84	22	Y180M-2
	75.6	40.5		6	56	14.89	30	Y200L₁-2
3/2C-AH	46.08	53.5	2500	5	45	14.9	22	Y180M-2	191	768×476×464	76	51
	64.8	51		5.6	53	17.3	30	Y200L₁-2
	81	48		7	56	18.9	30
3/2C-AH	50.4	62.3	2700	4	45	18.7	22	Y180M-2	191	768×476×464	76	51
	64.8	60		5.5	53	20.4	30	Y200L₁-2
	88.56	56		8	56	24.1	30
3/2D-HH	18	29	850	3	20	7.1	18.5	Y180L-6	750	986×768×698	76	51
	45	30		38	9.7	9.7	18.5	Y180M-4
	72	28		45	12.2	12.2	22	Y180L-4
3/2D-HH	18.72	33	900	3	20	8.4	15	Y180L-6	750	986×768×698	76	51
	46.44	33.5		20	11.2	11.2	22	Y200L₁-6
	73.8	31		45	13.9	13.9	30	Y225M-6
3/2D-HH	19.44	37	950	3	20	9.8	18.5	Y180M-4	750	986×768×698	76	51
	47.52	37.5		38	12.8	12.8	22	Y180L-4
	75.6	35		45	16	16	30	Y200L-4
3/2D-HH	19.8	39.7	980	3	20	10.7	30	Y225M-6	750	986×768×698	76	51
	46.8	39.7		35	14.5	14.5	30	Y250M-6
	75.6	37.8		45	17.3	17.3	37
3/2D-HH	21.6	45.1	1050	3	20	13.3	30	Y180L-4	750	986×768×698	76	51
	50.04	45.5		37	16.8	16.8	30	Y200L-4
	78.12	44		45	20.8	20.8	37	Y225S-4
3/2D-HH	23.4	50	1100	3	20	16	22	Y180L-4	750	986×768×698	76	51
	51.48	50		36	19.5	19.5	30	Y200L-4
	79.2	48		45	23	23	37	Y225S-4
3/2D-HH	24.48	54.8	1150	3	20	18.3	30	Y200L-4	750	986×768×698	76	51
	52.56	55		35	22.5	22.5	37	Y225S-4
	80.64	53		44	26.5	26.5	45	Y225M-4
3/2D-HH	25.2	59	1200	3	20	20.3	30	Y200L-4	750	986×768×698	76	51
	53.28	59.8		34	25.3	25.3	37	Y225S-4
	81.36	58		44	29.2	29.2	45	Y225M-4
3/2D-HH	27	64.3	1250	3	20	23.7	37	Y225S-4	750	986×768×698	76	51
	55.08	65.1		34	28.7	28.7	45	Y225M-4
	82.8	63.8		44	32.7	32.7	55	Y250M-4
3/2D-HH	28.08	70	1300	3	20	26.8	37	Y225S-4	750	986×768×698	76	51
	55.8	70		34	31.3	31.3	45	Y225M-4
	83.52	68		43	36	36	55	Y250M-4
3/2D-HH	28.8	75.2	1350	3	20	29.5	45	Y225M-4	750	986×768×698	76	51
	56.88	75.5		33	35.5	35.5	55	Y250M-4
	84.6	74		42	40.6	40.6	55
3/2D-HH	30.6	81	1400	3	20	33.8	55	Y250M-4	750	986×768×698	76	51
	56.68	81.2		33	39.4	39.4	55
	85.68	79.8		42	44.4	44.4	55
3/2D-HH	30.6	87	1450	3	20	36.3	55	Y250M-4	750	986×768×698	76	51
	58.68	88		32	44	44	55
	86.4	86		42	48.2	48.2	55
4/3C-AH(R)	28.8	11	1000	2.2	69	1.73	5.5	Y132S-4	263	843×584×516	102	76
	68.4	10.1		2	69	2.73	7.5	Y132M-4
	108	76		65	-	3.44	-

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
3/2C-AH(R)	33.48	34.2	2000	3	53	6.93	11	Y160M₂-2	191	768×476×464	76	51
	50.4	32.6		3.2	53	8.44	15	Y160M₁-2
	65.52	30.7		4.6	56	9.78	18.5	Y160L-2
3/2C-AH(R)	35.28	38	2100	3	45	8.11	15	Y160M₁-2	191	768×476×464	76	51
	52.2	36.1		3.5	53	9.68	18.5	Y160L-2
	69.12	34		5.2	56	11.43	22	Y180M-2
3/2C-AH	37.08	41.3	2200	3	45	9.27	15	Y160M₁-2	191	768×476×464	76	51
	54	39.7		4	53	11.02	18.5	Y160L-2
	72	37.4		5.5	56	13.1	22	Y180M-2
3/2C-AH	37.8	45.2	2300	3	45	10.34	18.5	Y160L-2	191	768×476×464	76	51
	57.6	43.4		4.5	53	12.84	22	Y180M-2
	75.6	40.5		6	56	14.89	30	Y200L₁-2
3/2C-AH	46.08	53.5	2500	5	45	14.9	22	Y180M-2	191	768×476×464	76	51
	64.8	51		5.6	53	17.3	30	Y200L₁-2
	81	48		7	56	18.9	30
3/2C-AH	50.4	62.3	2700	4	45	18.7	22	Y180M-2	191	768×476×464	76	51
	64.8	60		5.5	53	20.4	30	Y200L₁-2
	88.56	56		8	56	24.1	30
3/2D-HH	18	29	850	3	20	7.1	18.5	Y180L-6	750	986×768×698	76	51
	45	30		38	9.7	9.7	18.5	Y180M-4
	72	28		45	12.2	12.2	22	Y180L-4
3/2D-HH	18.72	33	900	3	20	8.4	15	Y180L-6	750	986×768×698	76	51
	46.44	33.5		20	11.2	11.2	22	Y200L₁-6
	73.8	31		45	13.9	13.9	30	Y225M-6
3/2D-HH	19.44	37	950	3	20	9.8	18.5	Y180M-4	750	986×768×698	76	51
	47.52	37.5		38	12.8	12.8	22	Y180L-4
	75.6	35		45	16	16	30	Y200L-4
3/2D-HH	19.8	39.7	980	3	20	10.7	30	Y225M-6	750	986×768×698	76	51
	46.8	39.7		35	14.5	14.5	30	Y250M-6
	75.6	37.8		45	17.3	17.3	37
3/2D-HH	21.6	45.1	1050	3	20	13.3	30	Y180L-4	750	986×768×698	76	51
	50.04	45.5		37	16.8	16.8	30	Y200L-4
	78.12	44		45	20.8	20.8	37	Y225S-4
3/2D-HH	23.4	50	1100	3	20	16	22	Y180L-4	750	986×768×698	76	51
	51.48	50		36	19.5	19.5	30	Y200L-4
	79.2	48		45	23	23	37	Y225S-4
3/2D-HH	24.48	54.8	1150	3	20	18.3	30	Y200L-4	750	986×768×698	76	51
	52.56	55		35	22.5	22.5	37	Y225S-4
	80.64	53		44	26.5	26.5	45	Y225M-4
3/2D-HH	25.2	59	1200	3	20	20.3	30	Y200L-4	750	986×768×698	76	51
	53.28	59.8		34	25.3	25.3	37	Y225S-4
	81.36	58		44	29.2	29.2	45	Y225M-4
3/2D-HH	27	64.3	1250	3	20	23.7	37	Y225S-4	750	986×768×698	76	51
	55.08	65.1		34	28.7	28.7	45	Y225M-4
	82.8	63.8		44	32.7	32.7	55	Y250M-4
3/2D-HH	28.08	70	1300	3	20	26.8	37	Y225S-4	750	986×768×698	76	51
	55.8	70		34	31.3	31.3	45	Y225M-4
	83.52	68		43	36	36	55	Y250M-4
3/2D-HH	28.8	75.2	1350	3	20	29.5	45	Y225M-4	750	986×768×698	76	51
	56.88	75.5		33	35.5	35.5	55	Y250M-4
	84.6	74		42	40.6	40.6	55
3/2D-HH	30.6	81	1400	3	20	33.8	55	Y250M-4	750	986×768×698	76	51
	56.68	81.2		33	39.4	39.4	55
	85.68	79.8		42	44.4	44.4	55
3/2D-HH	30.6	87	1450	3	20	36.3	55	Y250M-4	750	986×768×698	76	51
	58.68	88		32	44	44	55
	86.4	86		42	48.2	48.2	55
4/3C-AH(R)	28.8	11	1000	2.2	69	1.73	5.5	Y132S-4	263	843×584×516	102	76
	68.4	10.1		2	69	2.73	7.5	Y132M-4
	108	76		65	-	3.44	-

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
4/3C-AH(R)	32.4	13.2	1100	2.4	50	2.33	5.5	Y132S-4	263	843×584×516	102	76
	72	12.2		3	69	3.47	7.5	Y160M-6
	111.6	9.6		3	67	4.35	7.5
4/3C-AH(R)	35.6	15.9	1200	2.7	50	3.12	7.5	Y132M-4	263	843×584×516	102	76
	76	14.7		3	68	4.45	11	Y160M-4
	115.92	12.2		3	68	5.66	11
4/3C-AH(R)	39.6	18.6	1300	2.2	50	4.01	7.5	Y132M-4	263	843×584×516	102	76
	82.8	17.2		2.2	68	5.7	11	Y160M-4
	122.4	14.6		3	69	7.05	11
4/3C-AH(R)	43.2	21.6	1400	2.5	50	5.08	11	Y160M-4	263	843×584×516	102	76
	86.4	20.2		2.5	67	7.13	15	Y160L-4
	126.7	17.3		3.5	70	8.53	18.5	Y180M-4
4/3C-AH(R)	45	23.4	1460	2	50	5.74	15	Y160L-4	263	843×584×516	102	76
	90	21.8		2.7	67	7.97	18.5	Y180M-4
	129.6	19		3.6	70	9.58	22	Y180L-4
4/3C-AH(R)	50.4	28	1600	2.3	50	7.69	18.5	Y180M-4	263	843×584×516	102	76
	93.6	26.4		3.1	66	10.2	22	Y180L-4
	136.8	23		4.3	70	12.24	30	Y200L-4
4/3C-AH(R)	54	31.8	1700	2.6	50	9.35	18.5	Y180M-4	263	843×584×516	102	76
	100.8	30		3.5	66	12.48	22	Y180L-4
	144	26		4.6	70	14.46	30	Y200L-4
4/3C-AH(R)	54	35.6	1800	3	50	10.47	22	Y180M-2	263	843×584×516	102	76
	100.8	33.6		3.8	66	13.98	30	Y200L₁-2
	149.4	29.5		5	70.5	17.02	30
4/3C-AH	57.6	39.7	1900	3.2	50	12.45	22	Y180M-2	263	843×584×516	102	76
	108	37.6		4.2	66	16.76	30	Y200L₁-2
	154.8	33.2		5.5	70.5	19.82	30
4/3C-AH	61.2	44	2000	3.6	50	14.67	30	Y200L₁-2	263	843×584×516	102	76
	108	42		4.5	65	19	30
	158.4	37.1		6	74	22.54	30
4/3D-AH(R)	28.8	11	1000	2.2	50	1.73	5.5	Y132S-4	363	943×584×592	102	76
	68.4	10.1		2	69	2.73	7.5	Y132M-4
	108	7.6		65	65	3.44	7.5
4/3D-AH(R)	32.4	13.2	1100	2.4	50	2.33	5.5	Y132S-4	363	943×584×592	102	76
	72	12.2		3	69	3.47	7.5	Y132M-4
	111.6	96		3	67	4.35	7.5
4/3D-AH(R)	36	15.9	1200	2.7	50	3.12	7.5	Y132M-4	363	943×584×592	102	76
	75.6	14.7		3	68	4.45	11	Y160M-4
	115.92	12.2		3	68	5.66	11
4/3D-AH(R)	39.6	18.6	1300	2.2	50	4.01	7.5	Y132M-4	363	943×584×592	102	76
	82.8	17.2		2.2	68	5.7	11	Y160M-4
	122.4	14.6		2.3	69	7.05	11
4/3D-AH(R)	43.2	21.6	1400	2.5	50	5.08	11	Y160M-4	363	943×584×592	102	76
	86.4	20.02		2.5	67	7.13	15	Y160L-4
	126.7	17.3		3.5	70	8.53	18.5	Y180M-4
4/3D-AH(R)	50.4	28.00	1600	2.3	50	7.69	18.5	Y180M-4	363	943×584×592	102	76
	93.6	26.40		3.1	66	10.22	22	Y180L-4
	136.8	23.00		4.2	70	12.24	30	Y200M-4
4/3D-AH(R)	54.00	31.80	1700	2.6	50	9.35	18.5	Y180M-4	363	943×584×592	102	76
	100.80	30.00		3.5	66	12.48	22	Y180L-4
	144.00	26.00		4.6	70.5	14.46	30	Y200L-4
4/3D-AH(R)	54.00	35.60	1800	3	50	10.47	22	Y180M-2	363	943×584×592	102	76
	100.80	33.60		3.8	66	13.98	30	Y200L₁-2
	149.40	29.50		5	70.5	17.02	30
4/3D-AH	57.60	39.70	1900	3.2	50	12.45	22	Y180M-2	363	943×584×592	102	76
	108.00	37.60		4.2	66	16.76	30	Y200L₁-2
	154.80	33.20		5.5	70.5	19.82	30	Y200L₂-2
4/3D-AH	61.20	44.00	2000	3.6	50	14.67	30	Y200L-4	363	943×584×592	102	76
	108.00	42.00		4.5	65	19.54	37	Y225S-4
	158.40	37.10		6.0	74	22.54	45	Y225M-4

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
4/3E-HH	43.2	32.5	800	1.5	27	14.2	14.2	Y225M-6	1250	1240×984×889	102	76
	90	31.5		1.8	40	19.3	18.5	Y280S-6
	136.8	29.7		2.7	46	24.1	18.5	Y200L₁-6
4/3E-HH	45	36.8	850	1.5	27	16.7	37	Y250M-6	1250	1240×984×889	102	76
	93.6	35.1		1.8	40	22.4	45	Y225M-4
	140.4	33		2.6	46	27.5	55	Y280M-6
4/3E-HH	46.8	40.7	900	1.5	27	19.2	45	Y280S-6	1250	1240×984×889	102	76
	95.4	39.8		1.8	40	25.9	55	Y280M-6
	144	37.5		2.7	47	31.3	30	Y225M-6
4/3E-HH	48.6	44	940	1.5	27	21.6	30	Y225M-6	1250	1240×984×889	102	76
	97.2	42.7		1.8	40	28.3	45	Y280S-6
	147.6	41		2.7	47	35.1	55	Y280M-6
4/3E-HH	50.4	48	980	1.5	27	24.4	37	Y250M-6	1250	1240×984×889	102	76
	100.8	46.8		1.8	40	32.1	45	Y280S-6
	151.2	44.8		2.8	48	38.5	55	Y280M-6
4/3E-HH	52.2	50.1	1000	1.5	27	26.4	45	Y225M-4	1250	1240×984×889	102	76
	102.6	48.8		1.9	40	34.1	55	Y280M-6
	153	46.6		2.9	48	40.5	75	Y280S-4
4/3E-HH	54	55.8	1050	1.5	27	29.3	45	Y225M-4	1250	1240×984×889	102	76
	106.2	54.9		1.8	40	39.7	75	Y280S-4
	158.4	52		3	48	46.8	90	Y280M-4
4/3E-HH	57.6	61	1100	1.5	28	34.2	45	Y225M-4	1250	1240×984×884	102	76
	111.6	60		1.8	40	45.6	75	Y280S-4
	165.6	57		3.1	48	56	90	Y280M-4
4/3E-HH	61.5	67	1150	1.5	28	39.9	55	Y250M-4	1250	1240×984×884	102	76
	115.2	65		2	40	51	75	Y280S-4
	169.2	62		3.2	48	59.5	90	Y280M-4
4/3E-HH	64.8	72.5	1200	1.5	28	45.7	75	Y280S-4	1250	1240×984×884	102	76
	122.4	70.1		2.1	40	58.4	90	Y280M-4
	176.4	67.5		3.4	48	69	110	Y315S-4
4/3E-HH	64.8	79.1	1250	1.5	28	52.7	90	Y280S-4	1250	1240×984×884	102	76
	122.4	77.5		2.1	40	64.6	90	Y280M-4
	180	74		3.6	47	77.2	110	Y315S-4
4/3E-HH	72	85.1	1300	1.5	28	59.6	90	Y280M-4	1250	1240×984×884	102	76
	129.6	83.2		2.2	40	73.4	110	Y315S-4
	187.2	80		3.7	47	86.8	110
4/3E-HH	75.6	92.5	1350	1.5	27	70.5	110	Y315S-4	1250	1240×984×884	102	76
	136.8	90		2.4	40	83.8	110
	194.4	86.3		4	45	101.5	90
4/3E-HH	79.2	99.4	1400	1.5	27	79.4	110	Y315S-4	1250	1240×984×884	102	76
	140.4	96		2.5	39	94.1	110
	201.6	93		-	-	-	-
6/4D-AH(R)	72	16	800	3	50	6.27	15	Y160L-4	626	1021×812×668	152	102
	133.2	14.6		65	8.15	18.5	Y180M-4
	194.4	12.6		68	9.81	22	Y180L-4
6/4D-AH(R)	79.2	20	900	3	50	8.63	18.5	Y80M-4	626	1021×812×668	152	102
	147.6	18.4		3	65	11.38	22	Y180L-4
	216	16		3.3	68	13.84	30	Y225M-6
6/4D-AH(R)	86.4	23.7	980	3	50	11.15	22	Y200L₁-6	626	1021×812×668	152	102
	162	21.7		3	65	14.73	30	Y225M-6
	234	18.9		3.7	68	17.71	37	Y250M-6
6/4D-AH(R)	90	24.8	1000	3	50	12.16	15	Y180L-4	626	1021×812×668	152	102
	162	22.6		3	65	15.34	30	Y200L-4
	237.6	19.7		3.8	68	18.75	37	Y250M-4
6/4D-AH(R)	93.6	27	1050	3	50	13.76	22	Y180L-4	626	1021×812×668	152	102
	172.8	25		3.1	65	18.1	30	Y200L-4
	252	21.7		4	68	11.9	37	Y225S-4
6/4D-AH(R)	100.8	30	1100	3	50	16.47	20	Y200L-4	626	1021×812×668	152	102
	180	27.6		3.5	65	20.81	37	Y225S-4
	262.8	24		4.5	68	25.26	45	Y225M-4

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
6/4D-AH(R)	108	32	1150	3	50	18.82	37	Y225S-4	626	1021×812×668	152	102
	194.4	29.9		3.7	65	24.35	37	Y225M-4
	277.2	26		4.8	68	28.86	55	Y250M-4
6/4D-AH(R)	115.2	35.4	1200	3	50	22.21	37	Y225S-4	626	1021×812×668	152	102
	201.6	32.2		4	65	27.72	45	Y225M-4
	288	29.4		5	68	32.76	55	Y250M-4
6/4D-AH(R)	111.6	38.5	1250	3.1	50	23.4	37	Y225S-4	626	1021×812×668	152	102
	205.2	35.5		4	65	30.52	45	Y225M-4
	298.8	30.6		5.3	68	36.62	55	Y250M-4
6/4D-AH(R)	115.2	41.7	1300	3.4	50	26.16	45	Y225M-4	626	1021×812×668	152	102
	212.4	38.2		4.3	65	33.99	55	Y250M-4
	309.6	33.4		5.7	68	41.41	75	280S-4
6/4D-AH(R)	118.8	44.7	1350	3.5	50	28.92	45	Y225M-4	626	1021×812×668	152	102
	223.2	41		4.6	65	38.34	55	Y250M-4
	324	35.6		6	68	46.19	55	Y280M-4
6/4D-AH	122.4	48	1400	3.7	50	32	55	Y250M-4	626	1021×812×668	152	102
	226.8	44		4.8	65	41.81	55	Y280S-4
	331.2	38.5		6.5	68	51.07	75	Y280M-4
6/4D-AH	129.6	54	1480	4	50	-	45	Y225M-4	626	1021×812×668	152	102
	248.4	49.5		5.2	65	-	55	Y250M-4
	356.4	43		7	68	-	55
6/4E-AH(R)	93.60	27.00	1050	3	50	13.76	22	Y180L-4	728	1178×812×795	152	102
	172.80	25.00		3.1	65	18.1	30	Y200L-4
	252.00	21.70		4	68	11.49	22	Y225S-4
6/4E-AH(R)	100.80	30.00	1100	3	50	16.47	37	Y225S-4	728	1178×812×795	152	102
	180.00	27.60		3.5	65	20.81	37	Y225M-4
	262.80	24.00		4.5	68	25.26	45	Y250M-4
6/4E-AH(R)	108.00	32.00	1150	3	50	18.82	37	Y225S-4	728	1178×812×795	152	102
	194.40	29.90		3.7	65	24.35	45	Y225M-4
	277.20	26.00		4.8	68	28.86	55	Y250M-4
6/4E-AH(R)	115.20	35.40	1200	3	50	22.21	37	Y225S-4	728	1178×812×795	152	102
	201.60	32.20		4	65	27.72	45	Y225M-4
	288.00	28.40		5	68	32.76	55	Y250M-4
6/4E-AH(R)	111.60	38.50	1250	3.1	50	23.4	37	Y225S-4	728	1178×812×795	152	102
	205.20	35.50		4	65	30.52	45	Y225M-4
	298.80	30.60		5.3	68	36.62	55	Y250M-4
6/4E-AH(R)	115.20	41.70	1300	3.4	50	26.16	55	Y250M-4	728	1178×812×795	152	102
	212.40	38.20		4.3	65	33.99	75	280S-4
	309.60	33.40		5.7	68	41.41	75
6/4E-AH(R)	118.80	44.70	1350	3.5	50	28.92	45	Y225S-4	728	1178×812×795	152	102
	223.20	41.00		4.6	65	38.34	55	Y250M-4
	324.00	35.60		6	68	46.19	75	Y280M-4
6/4E-AH	122.40	48.00	1400	3.7	50	32	55	Y250M-4	728	1178×812×795	152	102
	226.80	44.00		4.8	65	41.81	75	Y280S-4
	331.20	38.50		6.5	68	51.07	90	Y280M-4
6/4E-AH	129.60	54.00	1480	4	50	-	75	Y280S-4	728	1178×812×795	152	102
	248.40	49.50		5.2	65	90	90	Y280M-4
	356.40	43.00		7	68	110	110	Y315S-4
6/4E-AH	133.20	56.00	1500	4	50	75	75	Y280S-4	728	1178×812×795	152	102
	252.00	51.00		5.3	65	90	90	Y280M-4
	360.00	44.00		7.1	68	110	110	Y315S-4
6/4E-AH	140.00	63.00	1600	4.5	50	90	90	Y280M-4	728	1178×812×795	152	102
	268.20	57.50		6	65	110	110	Y315S-4
	385.20	50.50		8	68	115	115	JS114-4
6/4F-HH	100	36	600	2	40	45	45	Y315S-10	3430	1560×1210×1160	150	100
	180	35.5		2	52	55	55	Y315M₁-10
	250	34		2	60	-	-
6/4F-HH	122	48	700	2	40	55	55	Y315S-8	3430	1560×1210×1160	150	100
	198	47		2	52	75	75	Y315M₁-8
	280	46		2.2	60	90	90	Y315M₁-8

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
6/4F-HH(R)	126	54	740	2	40	75	75	Y315M₁-8	3430	1560×1210×1160	150	100
	216	53.5		2	52	90	90	Y315M₁-8
	306	52.5		2.5	60	110	110	Y315M₁-8
6/4F-HH(R)	144	63	800	2	40	90	90	Y315M₁-6	3430	1560×1210×1160	150	100
	234	62.5		2.2	52	110	110	Y315M₂-6
	325	61		2.8	60	132	132	Y315M₂-6
6/4F-HH(R)	150	79.5	900	2	60	132	132	Y315M₁-6	3430	1560×1210×1160	150	100
	270	79		2.6	52	160	160	Y355M₁-6
	370	77		3.5	60	185	185	Y355M₂-6
6/4F-HH(R)	170	96.5	990	2.4	40	160	160	Y355M₁-6	3430	1560×1210×1160	150	100
	290	95		3.2	52	185	185	Y355M₂-6
	370	92		4.2	60	220	220	Y355L₁-6
6/4F-HH(R)	175	98	1000	2.5	40	185	185	Y315M₁-6	3430	1560×1210×1160	150	100
	306	97		3.2	52	220	220	Y315L₂-6
	414	94		4.2	60	250	250	Y315L₂-6
8/6E-AH(R)	126	12	500	2	51	8.1	22	Y225M-8	1473	1302×1102×917	203	152
	255	11.4		66	10.6	18.5	Y225S-8
	324	10		72	12.3	15	Y250M-8
8/6E-AH(R)	126	14.6	550	2	50	13	15	Y200L-8	1473	1302×1102×917	203	152
	252	13.5		3	67	16.8	22	Y225M-8
	360	12.2		3	72	16.6	30	Y250M-8
8/6E-AH(R)	144	17.4	600	2	50	13.7	30	Y250M-8	1473	1302×1102×917	203	152
	270	16.3		2	66	18.2	22	Y225M-8
	396	14.6		2.5	72	21.8	37	Y280S-8
8/6E-AH(R)	162	20.2	650	2	50	17.9	30	Y250M-8	1473	1302×1102×917	203	152
	306	19		3	66	23.6	37	Y280S-8
	432	17		3	72	27.8	45	Y280M-8
8/6E-AH(R)	162	23.6	700	2	50	20.8	30	Y225M-6	1473	1302×1102×917	203	152
	306	22.2		3.2	66	28	37	Y250M-6
	450	20		3.2	72	34.5	45	Y280S-6
8/6E-AH(R)	180	28.2	770	2	50	27.7	37	Y280S-6	1473	1302×1102×917	203	152
	342	27		2.3	66	38.1	55	Y280M-6
	504	23.9		4	72	45.6	90	Y315M-6
8/6E-AH(R)	180	30.8	800	2	50	30.2	55	Y280M-6	1473	1302×1102×917	203	152
	360	29		2.4	66	43.1	75	Y280S-4
	522	26		4.2	72	51.4	90	Y280-4
8/6E-AH(R)	197.3	34.6	850	2	50	37.2	75	Y280S-4	1473	1302×1102×917	203	152
	374	33		2.5	66	61.2	110	Y315M₁-6
	554	29.3		5	72	71.4	110	Y315M₂-6
8/6E-AH(R)	208.8	38.8	900	2	50	44.1	90	Y280M-4	1473	1302×1102×917	203	152
	396	37		3	66	65	115	JS114-4
	586.38	32.8		5.5	72	72.8	115	Y280S-4
8/6E-AH(R)	218.2	42.3	940	2	50 50.6	110	Y315M₂-6	1473	1302×1102×917	203	152
	413.6	40.4		3.3	66	69	83	Y315M₁-6
	612.7	35.8		6	72	83	132
8/6E-AH(R)	229.3	46.1	980	2	50	57.6	75	Y315S-6	1473	1302×1102×917	203	152
	432	44		4	68	78.5	90	Y315M₁-6
	635	38.9		6.5	72	93.5	110	Y315L₁-6
8/6E-AH(R)	234	48	1000	2	50	61.2	115	JS114-4	1473	1302×1102×917	203	152
	441	45.8		5	66	83.4	90	Y280M-4
	648	40.5		7.5	68	99.3	110	Y315M₂-6
8/6E-AH	252	53	1100	4	50	79.6	110	Y315S-4	1473	1302×1102×917	203	152
	439.2	56		4	65	103.05	115	JS114-4
	565.2	53		6	70	116.54	115
8/6R-AH(R)	208.8	38.8	900	3	50	44.1	110	Y315L₁-6	1655	1360×1102×810	203	152
	369	37		3	66	65	132	Y315L₂-6
	586.38	32.8		5.5	72	72.8	132
8/6R-AH(R)	218.2	42.3	940	2	50	50.6	110	Y315L₁-6	1655	1360×1102×810	203	152
	413.6	40.4		3.3	66	69	132	Y315L₂-6
	612.7	35.8		6	72	83	132

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
8/6R-AH	229.3	46.1	980	2	50	57.6	132	JS125-6	1655	1360×1102×810	203	152
	432	44		4	68	78.5	132	Y315M₃-6
	653	38.9		6.5	72	93.5	155	Y315M₂-6
8/6R-AH(R)	234	48	1000	2	50	61.2	155	JS116-4	1655	1360×1102×810	203	152
	441	45.8		4	66	83.4	135	JS115-4
	648	40.5		7.5	72	99.3	160	Y315L₁-4
8/6R-AH	252	58	1100	4	50	79.6	135	JS115-4	1655	1360×1102×810	203	152
	439.2	56		4	65	103.05	160	Y315L₁-4
	565.2	53		6	70	116.54	180	JS117-4
8/6R-AH	270	62	1140	4	50	91.18	132	Y315M-4	1655	1360×1102×810	203	152
	450	60		6	65	113.12	160	Y315L₁-4
	594	57		6	65	131.72	180	JS117-4
10/8E-M	252	19	600	3	50	26.1	22	Y225M-4	1625	1337×1226×927	254	203
	486	17		3	66	34.1	55	Y250M-4
	720	14.6		4.6	73	39.2	75	Y280S-4
10/8E-M	270	22.1	650	3	50	32.5	45	Y280-8	1625	1337×1226×927	254	203
	522	20.1		3.3	66	43.3	55	Y280M-4
	784.8	17.2		5.4	73	50.4	75	Y315M-8
10/8E-M	288	25.9	700	3.8	50	40.6	75	Y280S-4	1625	1337×1226×927	254	203
	576	23.1		3.8	67	54.1	90	Y280M-4
	842.4	20		6	73	62.9	115	JS117-6
10/8E-M	295.2	28	730	4	50	45	75	Y315M-8	1625	1337×1226×927	254	203
	576	25.4		4	67	59.5	90	Y315L₁-8
	871.2	21.4		6.3	73	69.6	110	Y315L₂-8
10/8E-M	309.6	30.8	770	4.1	50	51.9	110	Y315M₂-6	1625	1337×1226×927	254	203
	612	28		4.1	66	70.7	90	Y315M-6
	921.6	23.9		7	73	82.2	90
10/8E-M	342	33.9	800	4.4	50	59.8	90	Y280M-4	1625	1337×1226×927	254	203
	648	30.4		4.4	67	80.1	110	Y315L₁-6
	961.2	26		7.5	73	93.2	110
10/8E-M	342	37.9	850	3	50	70.6	110	Y315L₁-6	1625	1337×1226×927	254	203
	648	34.4		5	67	95.6	155	JS126-6
	1026	29.3		8.4	73	113.3	90	Y315M-6
10/8E-M	360	43	900	3	50	84.3	110	Y315L₁-6	1625	1337×1226×927	254	203
	720	38.6		5.5	67	113	115	JS126-6
	1087.2	33		9.2	73	133.8	115	JS117-6
10/8R-M(R)	295.20	28.00	730	4	50	45	75	Y315M-8	1836	1395×1226×927	254	203
	576.00	25.40		4	67	59.5	90	Y315L₁-8
	871.20	21.40		6.3	73	69.6	110	Y315L₂-8
10/8R-M(R)	309.60	30.80	770	4.1	50	51.9	90	Y315L₁-6	1836	1395×1226×927	254	203
	612.00	28.00		4.1	67	70.7	132	Y315L₂-6
	921.60	23.90		7	73	82.2	132
10/8R-M(R)	324	33.9	800	4.4	50	59.8	110	Y315L₁-6	1836	1395×1226×927	254	203
	648	30.4		4.4	67	80.1	132	Y315L₂-6
	961.2	26		7.5	73	93.2	155	JS126-6
10/8R-M(R)	342	37.9	850	3	50	70.6	110	Y315L₁-6	1836	1395×1226×927	254	203
	648	34.4		5	67	95.6	155	JS126-6
	1026	29.6		8.4	73	113.3	155	JS127-6
10/8R-M(R)	360	43	900	3	50	84.3	132	Y315L₂-6	1836	1395×1226×927	254	203
	720	38.6		5.5	67	113	132	JS126-6
	1087.2	33		9.2	73	133.8	185	JS117-6
10/8R-M(R)	378	46.6	940	3.3	67	95.9	129	Y315L₂-6	1836	1395×1226×927	254	203
	756	42.1		6	73	129.4	185
	1134	36		10	-	152.3	185	JS127-6
10/8R-M(R)	36	50.6	980	3.4	50	109.1	185	JS127-6	1836	1395×1226×927	254	203
	792	45.9		6.2	67	147.8	215	JS128-6
	1188	39		11	73	172.8	240	JS136-6
10/8R-M(R)	396	52.9	1000	3.6	50	114.1	155	JS116-4	1836	1395×1226×927	254	203
	792	47.9		6.3	67	154.2	155
	1209.6	40.7		11.2	73	183.7	180	JS117-4

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
10/8R-M(R)	432	57.9	1050	3.8	50	136.2	185	JS127-6	1836	1395×1226×927	254	203
	864	52		7.2	67	182.2	-
	1267.2	44.1		12.1	73	211.3	-
10/8R-M(R)	450	63.8	1100	4	50	156.4	240	-	1836	1395×1226×927	254	203
	900	57.1		7.6	67	208.9	-
	1324.8	49.2		13.2	73	243.2	215
8/6S-H	270	77	900	-	-	-	185	JS127-6	-	-	-	-
	468	75		-	-	-	-
	648	72.5		-	-	-	-
8/6S-HP	288	91	980	-	-	-	215	JS128-6	-	-	-	-
	478.8	90		-	-	-	240	JS136-6
	666	87		-	-	-	280	JS137-6
	-	-	-	-	-	-	380	JSI48-6 6kV
	-	-	-	-	-	-	460	JSI410-6 6kV
	-	-	-	-	-	-	-	JSI57-6 6kV
10/8ST-AH	216	14	400	2	50	16.47	45	Y315S-10	3750	1748×1346×1258	254	203
	396	12.9		2	65	21.4	-
	576	11.5		2.5	71	25.41	-
10/8ST-AH	234	16.1	440	2	50	20.52	45	Y315S-10	3750	1748×1346×1258	254	203
	432	15.4		2	65	27.87	55	Y315M-10
	630	14		3.2	71	33.83	-
10/8ST-AH	252	19	470	2	50	26.08	45	Y315S-10	3750	1748×1346×1258	254	203
	468	18		2	65	35.29	55	Y315M-10
	684	16.3		3.5	71	42.76	75	Y315L₂-10
10/8ST-AH	270	21.4	500	2	50	31.91	55	Y315M-10	3750	1748×1346×1258	254	203
	504	20.1		2	67	41.18	75	Y315L₁-10
	720	18.5		4	71	51.09	95	JS126-10
10/8ST-AH	295.2	25	540	2	50	40.20	75	Y315L₂-10	3750	1748×1346×1258	254	203
	540	23.5		2.4	66	52.36	-
	774	21.3		2.6	71	63.24	95	JS126-10
10/8ST-AH	324	29	580	2	50	51.12	95	JS126-10	3750	1748×1346×1258	254	203
	576	27.1		3	67	63.45	95
	828	25		5.3	71	79.40	130	JR128-10
10/8ST-AH	331.2	31.1	600	2	50	56.1	90	Y315L₁-8	3750	1748×1346×1258	254	203
	612	29.2		3	67	124.6	110	Y315L₂-8
	864	26.5		5.6	71	87.82	-	JS128-8
10/8ST-AH	345.6	33.5	625	2	50	63.06	110	Y315L₂-8	3750	1748×1346×1258	254	203
	612	31.7		3.2	66	80.05	155	JS128-8
	900	28.3		6	71	97.69	90	Y315L₁-8
10/8ST-AH	360	36.2	650	2	50	70.98	130	JS127-8	3750	1748×1346×1258	254	203
	648	34.2		3.5	67	90.08	-
	936	31		6.5	71	111.38	155	JS128-8
10/8ST-AH	381.6	39.3	675	2	50	81.68	130	JS127-8	3750	1748×1346×1258	254	203
	684	37		4	67	102.87	155	JS128-8
	972	33.4		7.1	71	124.57	180	JS136-8
10/8X-AH	414	42.5	700	2	50	95.83	155	JS136-8	3750	1748×1346×1258	254	203
	720	39.8		4.2	67	116.48	180	JS128-8
	1008	36.1		8	71	139.57	-
10/8ST-AH	432	46	730	2.1	50	108.24	210	JS137-8	3750	1748×1346×1258	254	203
	741.6	43.1		4.5	67	129.92	245	JS138-8
	1051.2	39.2		8.5	71	158.08	-
12/10ST-AH	316.8	12.7	350	2	60	18.26	30	Y315S-10	4318	1816×1510×1324	305	254
	540	11.8		2	75	23.14	37
	774	10.2		2.4	80	26.88	45
12/10ST-AH	360	16.2	400	2	60	26.47	55	Y315M-10	4318	1816×1510×1324	305	254
	630	15.2		2.2	76	34.31	75	Y315L₂-10
	885.6	13.4		3	80	40.4	-
12/10ST-AH	381.6	19.7	440	2	60	34.12	75	Y315L₂-10	4318	1816×1510×1324	305	254
	684	18.5		2.4	75	45.34	95	JS126-10
	986.4	16.4		3.2	80	55.07	-

TYPE	Capacity Q (m³/h)	Head H (m)	Speed n (r/min)	NPSHr (m)	Efficiency η (%)	Shaft Power (kW)	Motor Power (kW)	Motor Spec	Weight (kg)	Overall dimensions L×W×H (mm)	Inlet Dia. (mm)	Outlet Dia. (mm)
12/10ST-AH	486	31	550	2.2	60	68.38	100	JS126-8	4318	1816×1510×1324	305	254
	864	29		3	76	89.78	130	JS128-8
	1224	25.2		4.5	80	105	130
12/10ST-AH	504	34.1	580	2.3	60	78.01	130	JR128-10	4318	1816×1510×1324	305	254
	900	32		3.3	76	103.2	155	JS137-10
	1296	28		5	80	123.53	130	JS138-10
12/10ST-AH	525.6	37	600	2.4	56	88.27	130	JS127-8	4318	1816×1510×1324	305	254
	936	34.2		3.5	76	114.7	155	JS128-8
	1332	30.1		5.2	80	136.48	180	JS136-8
12/10ST-AH	540	40	625	2.5	60	98.04	130	JS127-8	4318	1816×1510×1324	305	254
	972	37.5		3.8	76	130.61	155	JS128-8
	1393.2	33		5.6	80	156.51	180	JS136-8
12/10ST-AH	576	43.4	650	2.6	60	113.46	155	JS128-8	4318	1816×1510×1324	305	254
	1008	40.5		3.9	76	146.28	180
	1450.8	35.7		6	80	176.31	180	JS136-8
12/10ST-AH	594	46.6	675	2.8	60	125.64	250	-	4318	1816×1510×1324	305	254
	1044	43.5		4	76	162.73	-
	1497.6	38.3		6.2	80	195.25	-
12/10ST-AH	612	50.1	700	3	76	139.17	280	-	4318	1816×1510×1324	305	254
	1080	46.9		4.3	76	181.5	-
	1548	41		6.7	80	216.05	315	-
12/10ST-AH	648	54.3	730	3	60	159.71	280	JSI410-8 6kV	4318	1816×1510×1324	305	254
	1134	50.3		4.5	76	206.42	320	JSI57-8 6kV
	1620	45		7.2	80	248.16	380	JSI58-8 6kV
14/12ST-AH	504	16	300	2	60	24.6	45	Y315M-10	6409	1873×1874×1482	356	305
	900	15		4	74	49.7	75	Y315L₁-10
	1296	13.5		5	77	61.95	95	JS126-10
14/12ST-AH	504	19	325	2	60	49.6	75	Y315L₁-10	6409	1873×1874×1482	356	305
	954	17.8		4	74	62.5	95	JS126-10
	1368	16		5.6	77	72.4	115	JS127-10
14/12ST-AH	576	22	350	2	60	57.5	75	Y315L₁-10	6409	1873×1874×1482	356	305
	1044	20.5		4.3	74	78.8	115	JS127-10
	1470	18.7		6	77	97.6	130	JS128-10
14/12ST-AH	612	25.1	375	2	60	69.7	130	JS128-10	6409	1873×1874×1482	356	305
	1084	23.7		4.5	74	94.2	165	JS138-10
	1584	21.2		6.7	77	118.8	-
14/12ST-AH	648	28.6	400	2	60	84.1	130	JS128-10	6409	1816×1510×1324	356	305
	1188	27		5	74	118.6	165	JS138-10
	1692	24		7.3	77	143.8	-
14/12ST-AH	648	32.3	425	2	60	100.3	130	JS128-10	6409	1816×1510×1324	356	305
	1260	30		5.3	74	139.1	165	JS138-10
	1800	27.2		8	77	173.2	-
14/12ST-AH	720	36.1	450	2	60	118	250	-	6409	1816×1510×1324	356	305
	1332	34		5.7	74	166.7	-
	1908	31		8.7	77	209.2	315	-
14/12ST-AH	756	39.6	470	4	60	135.9	210	-	6409	1816×1510×1324	356	305
	1368	37		6	74	186.3	280	-
	1980	33.5		9.2	77	234.6	355	-
14/12ST-AH	792	43	490	4	60	161	255	JSI410-12	6409	1816×1510×1324	356	305
	1440	40.5		6.4	74	223.6	280	JSI58-12
	2088	36.2		10	77	285.5	280	JSI510-12
14/12ST-AH	828	49	525	4.4	60	184.2	250	-	6409	1816×1510×1324	356	305
	1512	46.2		6.8	74	257.1	400	-
	2196	41.6		10.7	77	323.1	500	-
14/12ST-AH	882	54	550	4.5	60	216.2	315	-	6409	1816×1510×1324	356	305
	1584	50.8		7.3	74	296.1	450	-
	2304	45.9		11.7	77	374	560	-
14/12ST-AH	943	60.6	585	4.9	60	259.4	400	JSI510-10	6409	1816×1510×1324	356	305
	1692	57.6		8	74	358.7	-
	2455	51.6		13	77	448.1	480	JSI512-10

TAG:

M, AH, HH Series Slurry Pump

E-mail:sales@cnqapump.com

WhatsApp:8613169436000

Get Quote

Share to:

Category:

M, AH, HH Series Slurry Pump

Get A Quote

Fill in your phone and email information, and we will contact you promptly within one business day to resolve the issue you raised as soon as possible.

Submit

Purpose and Features

Selection introduction

Model significance

Structural diagram

Structural diagram

M. AH and HH slurry pump type spectrum

Transmission method

Performance Parameter Table

M, AH, HH Series Slurry Pump

Related Products